Of all the things that can go wrong with your plumbing in Long Island, one of the most frustrating is a toilet that does not flush properly. Problems with flushing range from not flushing at all to continuous “running” after the flush. Here at Master Plumbing Heating and Cooling we want to break down the common culprits when it comes to an improperly flushing toilet.
Not Flushing At All
If nothing happens when you press down the flusher, there are two common problems that may be happening inside your toilet. The first is that the tank may not have enough water in it. Without enough water, the tank will not flush. The valve for this is usually just behind your toilet, so ensure that it is open and the float inside the tank is unobstructed. The second most common problem with no flush at all is the chain connecting the flapper is loose or disconnected. If the chain is too loose, it will not activate the flush. Open the tank and ensure there is tension between the chain and your flusher.
Bowl Does Not Empty
When you press the flusher, it should lift the flapper in your tank allowing water to rush quickly into the bowl for a smooth flush. When your toilet bowl does not empty all the way, this can be a sign of a couple different issues. One may be that the pipes are clogged. This can be solved by plunging it yourself or snaking the pipes by a professional. If you have snaked and plunged your toilet and are still experiencing slow flushes, it can be the chain. If the chain is too loose, it may be lifting the flapper slowly. This slow release does not give the water the momentum it needs to flush the bowl quickly.
Perhaps the most annoying problem of all is when the toilet continuously “runs” after you’ve flushed it. That running water sound is not only annoying, but it’s also wasting water. When the flapper lifts to let the water into the bowl, it should seal tightly over the drain once the flush is complete. If the flapper is bent or warped, it will not seal properly which allows a slow stream of water to trickle into the bowl. That is the culprit for the running water noises. The flapper should be replaced if you hear that noise for extended periods of time after each flush.
If you find that your toilet is not flushing properly and these common culprits are not the solution, then you should call [Company Name]. Our trained plumbers are prepared for any issues and are ready to help you and your family.